Project Description : Roller Rehab Bridge Bearing Service , 21th April, 2018. Bearing rust removal, internal cleaning, painting, greasing and oiling. Mark bearings to gauge future movement and report on service and any defects identified. The bearings on both abutment were covered in ballast, dirt and plant life. Once the top of the piers were cleaned…
Existing coating had separated from the steel resulting in heavy rust & metal loss on the tread supports. The fixings were stainless steel which were in contact with steel supports. Treads were unbolted and removed using a crane. Plasticised coating removed off tread supports and surrounding metal stringers by manually cutting and grinding. All treads…
The heavily rusted frames were unbolted and craned down. The whole frame was then water/grit blasted to identify which areas needed to be repaired. Then, the heavily rusted sections were cut out and new plates were welded in. It received a prime coat and was…
Project Description : Roller Rehab Bridge Bearing Service , 18th April, 2018. Bearing rust removal, internal cleaning, painting, greasing and oiling. Report on service and any defects identified. Mark bearings to gauge future movement. Ballast and debris was covering both sets of bearings on both abutments. The bearings could not be seen. Pier 1 fixed bearing…
Project Description : Roller Rehab Bridge Bearing Service. Bearing rust removal, internal cleaning, painting, greasing and oiling. Report on service and any defects identified. Bearings generally had surface rust only and required cleaning prior to servicing. Concrete bearing bed has lifted and cracked and requires a repair. Before and After. Bearings cleaned, de-rusted and coated.…
Project Description : Bearing Cover Design, Fabrication and fitting following Roller Rehab Bridge Bearing Service on 5th April, 2017.
Project Description : Roller Rehab Bridge Bearing Service , 17th April, 2018. Bearing rust removal, internal cleaning, painting, greasing and oiling. Report on service and any defects identified. Mark bearings to gauge future movement. Ballast and debris on and around bearings on both abutments. Three bearing anchoring nuts were found to be loose. They were tightened on…
Project Description : Roller Rehab Bridge Bearing Service , 13-16 August, 2018. Bearing rust removal, internal cleaning, painting, greasing and oiling. Mark bearings to gauge future movement and report on service and any defects identified. Remove debris, clear drain holes, clean and coat base of open end posts on truss bridge. Photographs of Roller Rehab Service…
USTED STEEL DOOR FRAME REPAIR Our first step was to remove all rust and paint to a bare metal finish using a specialised wire brush attachment and Action Rust Removal Gel. Due to the large amount of debris thrown around during prep, Action Corrosion use a custom built PVC frame covered with a tarp which…
